華為路由器配置實例詳細備註講解

華為28-11路由器配置實例

1、進入系統(進入配置模式)

system

System View: return to User View with Ctrl+Z.

2、為路由器取名與設置密碼

[Quidway]local-user huawei

New local user added.

[Quidway-luser-huawei]password cipher huawei #/為配置密碼為huawei

3、設置服務類型、安全、訪問列表

[Quidway-luser-huawei]service-type telnet #/可以執行遠程登入

[Quidway-luser-huawei]level 3 #/設置安全級別

[Quidway-luser-huawei]acl number 2001 match-order auto

[Quidway-acl-basic-2001]rule 0 permit source

[Quidway-acl-basic-2001]rule 1 deny

4、進入接口、併為接口添加IP地址

[Quidway-acl-basic-2001]int ethernet 0/0

[Quidway-Ethernet0/0]ip add .158.58 /端口配置的IP地址為一個IP段

[Quidway-Ethernet0/0]nat outbound 2001

[Quidway-Ethernet0/0]int e 0/1

[Quidway-Ethernet0/1]ip add /端口配置的IP地址為一個IP段

[Quidway-Ethernet0/1]ip route-static .158.57 /為內網的'端口配置靜態路由

5、配置DHCP服務器(用來為內網的PC機分配IP地址)

[Quidway]dhcp server forbidden-ip

[Quidway]dhcp server forbidden-ip

6、為DHCP服務器的地址池説明網絡地址、子網隱碼、網關、DNS

[Quidway]dhcp server ip-pool 1

[Quidway-dhcp-pool-1]network mask

[Quidway-dhcp-pool-1]gateway-list

[Quidway-dhcp-pool-1]dns-list

7、保存命令

[Quidway-dhcp-pool-1]save

The configuration will be written to the device.

Are you sure?[Y/N]y

Now saving current configuration to the device.

Saving configuration flash:/. Please wait...

不明白之處請給位留言……